Setting Materials

High-Quality Stone Accessories in Honolulu, Hawaii

Setting Materials

Bostic Finley produces the best bonding and setting materials in the industry. For this reason, we at Selective Stone LLC are proud to offer these products exclusively. Whether you're looking for general purpose or fortified thin-set mortars, we've got you covered with our local stock. Our standard and designer grouts are available in sanded and non-sanded textures.
Setting materials

Tile-Mate

Tile-Mate Premium Thin Set Mortar is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone, and dimension stone tiles.

Use over properly-prepared concrete, structurally-sound, exterior-grade plywood (interior/dry use only); cementitioius backer board; Durabond D-222 DuraGuard; and existing, well-bonded vinyl/VCT or ceramic tile.
Tile Mate

Porcelain-Mate

Porcelain-Mate is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone, and dimension stone tiles.

Use over properly-prepared concrete, cement backer board, cured mortar beds, and brick cement block.
Porcelain-Mate

Bostik PM

Bostik PM is a multi-purpose, latex-modified mortar used for interior or exterior installations to set ceramic, porcelain, granite, slate, marble, limestone, and dimension stone tiles.

Use over properly-prepared concrete; structurally-sound, exterior-grade plywood (interior dry/use only); cementitious backer board; D-222 DuraGuard; and existing, well-bonded vinyl/VCT or ceramic tile.
Bostik PM

Single-Flex, Fast Setting Latex Thinset

Single-Flex, Fast Setting Latex Thinset is a premium, latex-modified, fast-setting mortar used for interior or exterior installations to set ceramic, porcelain, granite, slate, marble, limestone, and demension stone tiles.

Use over properly-prepared concrete; structurally-sound, exterior-grade plywood (interior/dry use only); cementitious backer board; D-222 DuraGuard; and all existing, well-bonded vinyl/VCT or ceramic tile.
  • Use where downtime must be minimized
  • Use as a fast-setting “thin set” or medium-bed”
  • Set and grout in same day
Single-Flex, Fast Setting Latex Thinset

Big Tile & Stone

Big Tile & Stone is a premium, latex-modified medium-set mortar used for all interior or exterior installations to set all large-seized ceramic, porcelain, granite, slate, marble, limestone and dimension stone tiles.

Use over properly-prepared concrete; structurally-sound, exterior-grade plywood (interior/dry use only); cementitous backer board; D-222; and existing, well-bonded vinyl/VCT or ceramic tile.
  • Helps prevent lippage between large tiles
  • Use from 1/8″ to 3/4″ thick
  • Use for all tiel and stone (except moisture-sensative marble)
Big Tile & Stone

Bostik Gold Plus

Bostik® GoldPlus™ is a ready-to-use, roller-applied, latex waterproofing and anti-fracture membrane for use beneath thin set ceramic tile installations on vertical and horizontal surfaces. GoldPlus exceeds the requirements of ANSI A118.10 (specification for waterproof membranes beneath thin set tile and stone) and ANSI A118.12 specification for crack isolation membranes. Use GoldPlus in commercial or residential applications. Apply over concrete, cement block walls, cement backer board, exterior grade plywood (interior, dry installations only) and mortar beds.

This product contains Bostik’s Blockade™ antimicrobial protection, which inhibits the growth of bacteria, mold or mildew on the surface of the dried membrane; the dried membrane resists stains caused by mold.
Bostik Gold Plus

D-1001 Floor & Wall Mastic

Use for installation of cermic tile and natural stone tile on interior walls and floors.
  • Excellent sag resistance
  • Easy to trowel
D-1001 Floor & Wall Mastic

Dimension Pre-Mixed Grout

Dimension™ Reflective, Pre-Mixed Urethane Grout is a patented, glass filled, ready-to-use, water based, urethane grout. Dimension contains micro glass beads and a translucent, urethane binder that both reflect light as well as allow it to pass through. This creates a unique reflective appearance in all tile installations as well as a three dimensional effect within glass tile installations.

Adds a New 
Dimension to All 
Tile Installations
Unique Reflective 
Appearance
Limitless Design 
Possibilities
No Sealing 
Required Ever
Stain-Proof*
LEED Compliant: 80% Recycled Glass, Eco-Friendly 
Formulation
Dimension Pre-Mixed Grout

Ceramic Tile Grout (Sanded)

Use Ceramic Tile Grout (sanded) for all types of ceramic mosaic, porcelain, granite, cultured marble, dimension stone and structural glazed tile where joint width is 1/8″ to 1 1/2″. Fortified Tile Grout is available in 40 popular colors.
  • Heavy duty, high compressive strength
  • Latex-fortified
  • Fast-setting
  • No shrinkage
Ceramic Tile Grout variety
Ceramic Tile Grout (Sanded)

Dry Tile Grout (Unsanded)

Use Dry Tile Grout (unsanded) to grout any type of tile or natural stone with joints up to 1/8″.
  • Interior/exterior
  • Fast-setting
  • Excellent workability
Dry Tile Grout variety
Dry Tile Grout (Unsanded)
TruColor Pre-Mixed Grout

TruColor Pre-Mixed Grout

Bostik Tru Color Pre-Mixed Grout is a patented, water-based, urethane grout offering the ultimate in color accuracy, stain protection and crack resistance for residential and commercial tile installations.
This breakthrough formulation installs up to 50% faster than traditional grouts, and never needs to be sealed. Its perfect balance of flexibility and toughness enable it to exhibit unmatched performance and crack resistance. TruColor exceed the grout-relevant portion of the ANSI 118.3 epoxy standard (modified ANSI 118.3 -UG).

Available in 18lb and 9lb containers.
TruColor Pre-Mixed Grout variety
Ensure the success of your project with the best stone care accessories, call (808) 839-2979 today!
Share by: